info@shopfrontsdirect.co.uk
ShopFronts Direct offer a vast range of sections to meet all your roller shutter requirements. Below is a list of some the sections we supply. All our shop fronts, commercial shutters and more are built to high standards using the best materials. We have been designing and fitting shop fronts for many years now. You can be assured that you will get the best service and products.
Our shutters canopies are produced in 20swg. Standard size canopies are stocked in 6 meter lengths. We also produce to various sizes to suit our customers’ requirement.
We offer powder coating service on these products.
All our guide channels are produced in 3 mm thickness available in galvanized or self colour mild steel.
3 mm Galvanized Guide Channels
32 mm Base X 50 mm Leg (1″ X 2″)
32 mm Base X 65 mm Leg (1″ X 2½”)
32 mm Base X 75 mm Leg (1″ X 3″)
32 mm Base X 100 mm Leg (1″ X 4″)
Stocked in 6 and 8 metre lengths. We also offer powder coating service on these products
Our shutters canopies are produced in 20swg. Standard size canopies are stocked in 6 meter lengths. We also produce to various sizes to suit our customers’ requirement.
We offer powder coating service on these products.
All our guide channels are produced in 3 mm thickness available in galvanized or self colour mild steel.
3 mm Galvanized Guide Channels
32 mm Base X 50 mm Leg (1″ X 2″)
32 mm Base X 65 mm Leg (1″ X 2½”)
32 mm Base X 75 mm Leg (1″ X 3″)
32 mm Base X 100 mm Leg (1″ X 4″)
Stocked in 6 and 8 metre lengths. We also offer powder coating service on these products
We offer tube section in 8 metre lengths.
4” 16SWS
4” 9SWG
4” 10SWG
We offer a range of different shutter plates. Please call us for further information
We offer tube section in 8 metre lengths.
4” 16SWS
4” 9SWG
4” 10SWG
We offer a range of different shutter plates. Please call us for further information
We offer three types of galvanized 75 mm traditional laths:
These sections are available in 18swg, 20swg and 22swg, cut to customers specification. We also offer a powder coating service on these products.
We offer three types of galvanized 75 mm traditional laths:
These sections are available in 18swg, 20swg and 22swg, cut to customers specification. We also offer a powder coating service on these products.
T and L section both are only available in galvanized steel. Produced in light to heavy gauge depending on customer requirements.
Stocked in 6 and 8 metre lengths.
We offer powder coating service on these products.
T and L section both are only available in galvanized steel. Produced in light to heavy gauge depending on customer requirements.
Stocked in 6 and 8 metre lengths.
We offer powder coating service on these products.
All our angles are supplied in galvanized or self colour mild steel. Our angles are produced to a 90 degree angle supplied in 3 mm and 5 mm thickness.
3 mm Galvanized Angle Channels
50 mm X 50 mm (2″ X 2″)
75 mm X 50 mm (3″ X 2″)
100 mm X 50 mm (4″ X 2″)
Stocked in 6 and 8 metre lengths.
We also offer powder coating service on these products.
All our angles are supplied in galvanized or self colour mild steel. Our angles are produced to a 90 degree angle supplied in 3 mm and 5 mm thickness.
3 mm Galvanized Angle Channels
50 mm X 50 mm (2″ X 2″)
75 mm X 50 mm (3″ X 2″)
100 mm X 50 mm (4″ X 2″)
Stocked in 6 and 8 metre lengths.
We also offer powder coating service on these products.
